Honda CBR650 - Service manual > Crankcase/transmission
See also:
Honda CBR650 - Service manual > Stator
REMOVAL/INSTALLATION Remove the left crankcase cover. Remove and install the stator as following illustration. Installation is in the reverse order of removal.
Honda CBR650 - Service manual > Service information
GENERAL The crankcase must be separated to service the following: Transmission Crankshaft Piston/connecting rod/cylinder The following components must be removed before separating the crankcase: Engine Clutch Gearshift linkage Starter clutch Flywheel Cylinder head Oil pan Oil pump Oil cooler Starter motor Water pump EOP switch VS sensor Neutral switch Be careful not to damage the crankcase mating surfaces when servicing. Prior to assembling the crankcase halves, apply sealant to their mating surfaces. Wipe off excess sealant thoroughly.
Rider's Manual BMW R 1250 GS GSA
Owner's Manual Harley-Davidson Sportster XL1200X Forty-Eight
Owner's Manual Honda CBR650R
Service manual Honda CBR650
Owner's Manual Honda PCX125
Owner's Manual Kawasaki Z1000SX
Service manual Kawasaki Z1000SX
Owner's Manual Lexmoto Echo
Owner's Manual Royal Enfield Interceptor 650
Service manual Royal Enfield Interceptor 650
Owner's Manual Yamaha MT-07