Royal Enfield Interceptor 650 - Owner's Manual
Royal Enfield Interceptor 650 - Owner's Manual
- Information, Safety and Rules of the Road
- Accessories and Luggage, Specifications
- Location of Key Parts
- Operation of Controls
- Pre-operational Checks, Starting
- Gear Shifting, Riding and Stopping, Parking
- Minor Maintenance Tips
- Hand levers, centre and side stand pivots
- Spark plug
- Front wheel reassembly
- Rear wheel reassembly
- Battery and maintenance
- Changing electrical components
- Precautions, Trouble Shooting
- Periodical Maintenance
See also:
> Changing the Bulb, Adjusting the Headlight
Changing the bulb NOTE Use only tested, incandescent bulbs with the designation. Use of non-approved bulbs will void the operating license. Do not touch the bulbs with bare fingers. Hold bulbs with a clean, dry cloth when installing or removing them. Low beam-high beam bulb: 12V 35W/35W Turn off the ignition. Remove the screw and bolts (1). Take off the headlight cover (2). Disconnect the plug (3). Turn the indicator bulb holder (4) clockwised, take off the bulb holder. Press the indicator bulb and turn counterclockwised, take off the bulb (5).
Rider's Manual BMW R 1250 GS GSA
Owner's Manual Harley-Davidson Sportster XL1200X Forty-Eight
Owner's Manual Honda CBR650R
Service manual Honda CBR650
Owner's Manual Honda PCX125
Owner's Manual Kawasaki Z1000SX
Service manual Kawasaki Z1000SX
Owner's Manual Lexmoto Echo
Owner's Manual Royal Enfield Interceptor 650
Service manual Royal Enfield Interceptor 650
Owner's Manual Yamaha MT-07