Yamaha MT-07 - Owner's Manual > Fuel tank overflow hose

1. Fuel tank overflow hose
2. Clamp
3. Original position (paint mark)

Before operating the motorcycle:

• Check the fuel tank overflow hose connection.
• Check the fuel tank overflow hose for cracks or damage, and replace it if necessary.
• Make sure that the end of the fuel tank overflow hose is not blocked, and clean it if necessary.
• Make sure that the fuel tank overflow hose is routed through the clamp.
• Make sure that the paint mark on the fuel tank overflow hose is below the clamp.

Catalytic converter

This model is equipped with a catalytic converter in the exhaust system

WARNING

The exhaust system is hot after operation.

To prevent a fire hazard or burns:

• Do not park the vehicle near possible fire hazards such as grass or other materials that easily burn.
• Park the vehicle in a place where pedestrians or children are not likely to touch the hot exhaust system.
• Make sure that the exhaust system has cooled down before doing any maintenance work.
• Do not allow the engine to idle more than a few minutes. Long idling c

NOTICE

Use only unleaded gasoline. The use of leaded gasoline will cause unrepairable damage to the catalytic converter.

See also: