Honda CBR650 - Service manual > Clutch/gearshift linkage/starter clutch

Engine/drive train electrical / Clutch/gearshift linkage/starter clutch

See also:

 Honda CBR650 - Service manual > Cylinder head

REMOVAL Remove the following: Exhaust pipe/muffler Throttle body Camshaft Disconnect the ECT sensor 2P (Blue) connector [1] and bleeding hose [2].

 Honda CBR650 - Service manual > Service information

GENERAL This section covers service of the clutch, gearshift linkage and starter clutch. All service can be done with the engine installed in the frame. Engine oil viscosity and level have an effect on clutch disengagement. When the clutch does not disengage or the motorcycle creeps with clutch disengaged, inspect the engine oil level before servicing the clutch system. For starter motor service.