Royal Enfield Interceptor 650 - Service manual > Components Assembly on Engine
Engine / Components Assembly on Engine
- Oil Bypass
- Piston Rings on Piston
- Floating Chain Pad
- Camshaft Sub Assembly
- Tappet Clearance Adjustment
- Reed Valves
- Injector, TPS, MAPS, ISC Connections
- Oil Pump
- Clutch Cover
- Magneto Cover Sub Assembly
See also:
Royal Enfield Interceptor 650 - Service manual > Components from Cylinder Head
Valves and Springs Compress valve spring with special tool (a). Remove the cotters (a) on valve stem at the top. Gently loosen the screw on valve spring compressor, till the valve spring tension is completely released and remove the special tool.
Royal Enfield Interceptor 650 - Service manual > Oil Bypass
Ensure O-rings (a) are located properly. Install oil bypass pipe (b) into lower crankcase oil gallery. Tighten 2 Nos. Hex socket head screw (M6) (a) to specified torque.
Rider's Manual BMW R 1250 GS GSA
Owner's Manual Harley-Davidson Sportster XL1200X Forty-Eight
Owner's Manual Honda CBR650R
Service manual Honda CBR650
Owner's Manual Honda PCX125
Owner's Manual Kawasaki Z1000SX
Service manual Kawasaki Z1000SX
Owner's Manual Lexmoto Echo
Owner's Manual Royal Enfield Interceptor 650
Service manual Royal Enfield Interceptor 650
Owner's Manual Yamaha MT-07